DTC C1119-62: Hydraulic Pressure - Signal compare failure: Action
WARNING: This page is about a different car, the 2021 Land Rover Range Rover Sport, 2020 Land Rover Range Rover Sport, and 2019 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Check and top up the hydraulic fluid as required
- Check integrity of hydraulic system and rectify any leaks as required. Complete manual bleed procedure. Clear the DTCs and retest
- If the fault persists, install a new valve block. Clear the DTCs and retest
- If the fault persists, install a new pressure transducer. Clear the DTCs and retest
- If the fault persists, install a new filter. Clear the DTCs and retest
- If the fault persists, check the operation of the front and rear actuators and install new actuator(s) as required. Clear the DTCs and retest
- If the fault persists, install a new drop link(s) or stabilizer bar(s). Clear the DTCs and retest