DTC B00A0-51: Occupant Classification System - Not programed: Action

WARNING: This page is about a different car, the 2021 Land Rover Range Rover Sport, 2020 Land Rover Range Rover Sport, and 2019 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

To clear this DTC, the existing module programming procedure must first be performed.
If a new occupant classification sensor service kit is installed the new module replacement and programming procedure must be performed.
Do not attempt to install individual components from the occupant classification sensor service kit, as they are calibrated to function as a single assembly.

Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists reprogram the occupant classification sensor control module. Refer to OCCUPANT CLASSIFICATION SENSOR CONTROL MODULE (OCSCM) EXISTING MODULE PROGRAMMING
If the fault persists, check and install a new occupant classification kit and follow the reprogramming procedure. Refer to OCCUPANT CLASSIFICATION SENSOR CONTROL MODULE (OCSCM) NEW MODULE REPLACEMENT AND PROGRAMMING