LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Speed Control -- Range Rover Velar/L560 >> Speed Control (G2154198) >> Removal And Installation >> Speed Control Switch (G1899121) >> Installation

Speed Control Switch (G1899121): Installation

    • Install the speed control switch.
    • Install the retaining screw.
    • Connect the electrical connector.
  2. NOTE: Make sure that the harness is routed to the position noted on removal.
    • Connect the electrical connector.
    • Install the paddle shifter.
    • Install the retaining screw.
  3. Install the driver airbag.

    Refer to: DRIVER AIRBAG

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals