DTC C1119-62: Hydraulic Pressure - Signal compare failure: Action
- Check and top up the hydraulic fluid as required
- Check integrity of hydraulic system and rectify any leaks as required. Carry out manual bleed procedure. Clear the DTCs and retest
- If the fault persists, install a new valve block. Clear the DTCs and retest
- If the fault persists, install a new pressure transducer. Clear the DTCs and retest
- If the fault persists, install a new filter. Clear the DTCs and retest
- If the fault persists, check the operation of the front and rear actuators and install new actuator(s) as required. Clear the DTCs and retest
- If the fault persists, install a new drop link (s) or stabilizer bar(s). Clear the DTCs and retest