Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the DTC
- Monitoring injector for short circuit high side switch to low side
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference O_P_PVL13
- Circuit reference O_P_PVH13
- Monitor Description
- Driver output voltage of injector below threshold
- Prioritised List of Possible Causes
- The powertrain control module has detected a ground measurement for a period longer than expected or has detected a ground measurement when another value was expected
- Driver output voltage of fuel injector below threshold
- Fuel injector circuit short circuit to ground, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Fuel injector failure