Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the DTC
- Indicates that the ambient air temperature sensor has seen temperatures below its normal minimum operating threshold temperature of -45° C
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference G_R_ATS
- Circuit reference I_A_ATS
- Monitor Description
- Indicates that the Ambient temperature sensor has seen temperatures below its normal minimum operating threshold temperature of -45° C
- The powertrain control module has determined failures where some circuit quantity, reported via serial data, is below a specified range
- Ambient air temperature sensor circuit short circuit to ground
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Ambient air temperature sensor failure