DTC P0919-94: Gear Shift Position Control Error - Unexpected operation: Action
- Using Jaguar Land Rover approved diagnostic equipment, select the DTC associated Guided Diagnostics to facilitate a transfer case clutch calibration. The Guided Diagnostics will subsequently test the system and report a DTC if a fault persists
- Using Jaguar Land Rover approved diagnostic equipment, clear the DTCs and cycle the ignition
- Start the engine and, using Jaguar Land Rover approved diagnostic equipment, read the DTCs. If the fault persists, install a new transfer case control module and configure as a new module. Refer to the Transfer Case Control Module Replacement Application instructions in the relevant Diagnosis and Testing Section For additional information, refer to: DIAGNOSTICS (307-01 Automatic Transmission/Transaxle, Diagnosis and Testing). Using Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest