DTC C1B00-62: Steering Angle Sensor - Signal compare failure: Action

NOTE: When the steering is in the straight ahead position, the Steering Wheel Angle value should be 0°.

Set the steering to straight ahead. Using the Jaguar Land Rover Approved Diagnostic Equipment, check datalogger signal - Steering Wheel Angle 203A. If the value is ±360° or ±720°, the steering angle sensor module has been installed incorrectly. Rectify as necessary. Clear the DTCs and retest
Using the Jaguar Land Rover Approved Diagnostic Equipment, check the steering angle sensor module for related DTCs and refer to the relevant DTC index