DTC B1354-87: Right Rear Temperature Damper Motor - Missing message: Action
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the rear right temperature blend motor power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the LIN circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear DTCs and perform routine - Run end stop detection on damper motors (0x9006). Check for DTCs and if the fault persists, install a new rear right temperature blend motor as necessary