DTC B1083-71: Recirculation Damper Motor - Actuator stuck: Action

Remove any obstructions from the recirculation motor mechanism. Using the Jaguar Land Rover Approved Diagnostic Equipment, clear DTCs and perform routine - Run end stop detection on damper motors (0x9006). Check for DTCs
If the fault persists, compare datalogger signals - Fresh/Recirculated Air Distribution Flap Actuator Requested Position (0x9902) - and - Fresh/Recirculated Air Distribution Flap Actuator Measured Position (0x98F0). If inconsistent, install a new recirculation motor as necessary