DTC U3000-54: Control Module - Missing calibration: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery Sport, 2017 Land Rover Discovery Sport, 2016 Land Rover Discovery Sport, and 2015 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following pre-conditions are required to run the routine successfully: Ignition is set to on, the occupant classification sensor control module has passed the seat assembly plant calibration, no collision event received from the restraints control module during the current ignition cycle, no DTCs set in the current ignition cycle, occupant classification sensor control module has settled for 10 seconds, ambient temperature is 6°C (42°F) to 36° C (97°F), seat is installed in original position.
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position