Transfer Box Casings

The front and rear casing assemblies are manufactured from cast aluminum.

FRONT CASING ASSEMBLY

The front casing assembly provides the location for the input shaft bearing and the front output flange bearing. It is also equipped with threaded holes to mount the chassis mounting bush, two lifting eyes and a breather cartridge for the transfer box breather pipe. The breather pipe allows an equalization between atmospheric and internal transfer box pressure.

REAR CASING ASSEMBLY

The rear casing assembly provides the location for the rear output flange bearing, the transfer box motor and the oil fill and drain plug. Fins are cast into the rear casing assembly to improve the heat dissipation. The unit number is also stamped into the rear housing.