DTC C1032-64: Raise-Lower Switch - Signal plausibility failure: Action

Check the operation of the suspension raise and lower switches. Clear the DTCs and retest
Refer to the appropriate system wiring diagram and check the terrain response switchpack power and ground circuits for open circuit. Repair circuit as required, clear the DTCs and retest
Using Jaguar Land Rover Approved Diagnostic Equipment, complete a CAN network integrity test. Refer to the appropriate system wiring diagram and check the CAN network between the terrain response switchpack and the suspension control module. Repair circuit as required, clear the DTCs and retest
If the fault persists, install a new terrain response switchpack. Clear the DTCs and retest