LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Base >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> HVAC Control Systems >> Service Action: Anti-Lock Brake, Climate Control, And Parking Aid Control Module Software Updates (Q324NAS2)

Service Action: Anti-Lock Brake, Climate Control, And Parking Aid Control Module Software Updates (Q324NAS2)

Publication date: 2014-10-27
Reference number: Q324NAS2
Supersedes refnos: Q324NAS1

SERVICE ACTION: ANTI-LOCK BRAKE, CLIMATE CONTROL, AND PARKING AID CONTROL MODULE SOFTWARE UPDATES

SERVICE ACTION: ANTI-LOCK BRAKE, CLIMATE CONTROL, AND PARKING AID CONTROL MODULE SOFTWARE UPDATES

TECHNICAL SERVICE BULLETIN

Reference Number(s): Q324NAS1, Date of Issue:  October 27, 2014
LAND ROVER: 2014 Range Rover (LG)
SECTION: 100-00
AFFECTED VEHICLES: Range Rover (LG) Model Year: 2014 VIN: EA110440-EA135110

MARKETS

NAS

CONDITION SUMMARY

This Service Action supersedes Update Prior to Sale Notice UPS4413-6bNAS1 with immediate effect. 

Situation:  To ensure 2014 model year Range Rover (L405) vehicles are equipped with the very latest software, a limited number of vehicles require updates to the following control modules:

Action:  Retailers are required to HOLD  affected vehicles within the listed VIN range that are in their control and refrain from releasing the vehicles for new or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer. Affected vehicles already in the hands of customers should be updated at the next available opportunity.

PARTS

No parts required

SPECIAL TOOLS

NOTE: This document is an 'Active Bulletin' that will display a functional programming shortcut if accessed within a diagnostic session using SDD.

IDS with latest IDS-DVD and Calibration File; first available on DVD139.05 v.188

Jaguar Land Rover-approved Midtronics Battery Power Supply

WARRANTY

NOTE: Check DDW to ensure that the vehicle is affected by this program prior to undertaking any rework action. Repair procedures are under constant review, and therefore times/prices are subject to change; those quoted here must be taken as guidance only. Refer to the Repair Times Searcher (RTS) on TOPIx to obtain the latest repair time. At the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting Program Code 'Q324'  together with the relevant Option Code from the table. The SRO and part information listed have been included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.

This program is valid for a limited time only. Warranty claims with a repair date prior to the 31 October 2016  closure date must be submitted for payment within 30 calendar days of completion of the repair.

PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS QTY. / VALUE
Q324 B
NOTE: VIN EA110440-EA129699 ONLY

Update Anti-lock Brake System control module software
Update Parking Aid control module software - with IDS connected
Update Climate Control control module software - with IDS connected		 70.90.03
86.90.63.02
80.90.12.02		 0.3
0.1
0.1		 - -
Q324 C
NOTE: VIN EA110440-EA129699 ONLY

Update Anti-lock Brake System control module software
Update Parking Aid control module software - with IDS connected
Update Climate Control control module software - with IDS connected
Drive in/drive out		 70.90.03
86.90.63.02
80.90.12.02
02.02.02		 0.3
0.1
0.1
0.2		 - -
Q324 F
NOTE: VIN EA129700-EA131561 ONLY

Update Anti-lock Brake System control module software
Update Climate Control control module software - with IDS connected		 70.90.03
80.90.12.02		 0.3
0.1		 - -
Q324 G
NOTE: VIN EA129700-EA131561 ONLY

Update Anti-lock Brake System control module software
Update Climate Control control module software - with IDS connected
Drive in/drive out		 70.90.03
80.90.12.02
02.02.02		 0.3
0.1
0.2		 - -
Q324 K
NOTE: VIN EA131562-EA135110 ONLY

Update Climate Control control module software		 80.90.12 0.2 - -
Q324 L
NOTE: VIN EA131562-EA135110 ONLY

Update Climate Control control module software
Drive in/drive out		 80.90.12
02.02.02		 0.2
0.2		 - -
NOTE: Normal Warranty policies and procedures apply

SERVICE INSTRUCTION

CAUTION: Ensure all ignition 'ON'/ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during IDS/SDD diagnosis/module programming.
NOTE: IDS must be loaded with DVD139.05 v.188 or later.
  1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.

    Climate Control Module Software Update - All VINs 

    NOTE: In the event of an error during the programming routine, SDD will allow the user to attempt reprogramming. Ensure all on-screen prompts are followed. Ensure 'Retry' is attempted if a failure occurs. If further diagnostic support is required, contact the Technical HelpLine.
  2. Turn ignition 'ON' (engine not running).
  3. Connect the Integrated Diagnostic System (IDS) to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
  4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data collect sequence.
  5. Select 'Diagnosis' from the Session Type screen.
  6. Select the 'Selected Symptoms' tab, and then select the following:
    • Electrical > Climate control system > Temperature regulation
  7. Select the 'Extras' tab.
  8. From the Recommendations tab, select Run  to perform the 'Configure existing module - Heating ventilation and air conditioning control module' option.
  9. Follow all on-screen instructions to complete this task.

    Anti-Lock Brake System Module Software Update - VINs EA110440-EA131561 only 

  10. Select the 'Selected Symptoms' tab, and then select the following:
    • Chassis > Braking system > ABS
  11. Select the 'Extras' tab.
    NOTE: In the event of an error during the programming routine, SDD will allow the user to attempt reprogramming. Ensure all on-screen prompts are followed. Ensure 'Retry' is attempted if a failure occurs. If further diagnostic support is required, contact the Technical HelpLine.
  12. From the Recommendations tab, select Run  to perform the 'Configure existing module - ABS control module' option.
  13. Follow all on-screen instructions to complete this task.

    Parking Assist System Module Software Update - VINs EA110440-EA129699 only 

  14. Select the 'Selected Symptoms' tab, and then select the following:
    • Electrical > Driving aids > Parking aid
  15. Select the 'Extras' tab.
  16. From the Recommendations tab, select Run  to perform the 'Configure existing module - Parking assist control module' option.
  17. Follow all on-screen instructions to complete this task, ensuring all DTCs are cleared.
  18. Exit the current session.
  19. Disconnect the IDS and the battery power supply from the vehicle.
scientia non olet · About LEMON Manuals