LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> LR4 Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case >> Four-Wheel Drive Systems -- LR4/L319 >> Four-Wheel Drive Systems >> Four-Wheel Drive Systems (Description And Operation) >> Description And Operation >> Transfer Box Power Flow >> Range Change Procedure (Manual Vehicles Only)

Range Change Procedure (Manual Vehicles Only)

Neutral must be selected on the main transmission before requesting a range change and then select the appropriate gear following completion of the range change. During the range change the driver must not attempt to move the main transmission out of neutral. If the lever is moved out of neutral then the range change will stop and will be completed only when the driver re-selects neutral on the main transmission. This must be done to prevent damage to the transfer box mechanism.

The speed limit for shift-on-the-move for the manual vehicle is set lower than for the auto, at around 12 mph (20 km/h) for high to low and 37 mph (60 km/h) for low to high. The lower limits are set so that, if the driver tries to select too lower gear following a range change, no damage is caused to the vehicle.

scientia non olet · About LEMON Manuals