Removal And Installation: Installation

CAUTION:
- Care must be taken not to bend or damage the brake pipes during installation.
- Following installation a visual inspection must be completed to make sure the brake pipe(s) are routed and secured correctly. The brake pipe(s) must not touch the body or surrounding components
- Be prepared to collect escaping fluid.
NOTE: Remove and discard all blanking caps.

To install, reverse the removal procedure.
- Refer to: BRAKE SYSTEM BLEEDING - VEHICLES WITH: STANDARD BRAKES .
- Refer to: BRAKE SYSTEM BLEEDING - VEHICLES WITH: HIGH PERFORMANCE BRAKES .
- Hybrid Electric Vehicles (HEV) only.
- Using the Land Rover approved diagnostic equipment, calibrate the brake pedal sensor.
  General Equipment: Land Rover diagnostic equipment