DTC U210A-62: Temperature Sensor - Signal compare failure: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
- Allow the rear differential to cool (1 hour minimum). Using the manufacturer approved diagnostic system, check datalogger signals - Motor Temperature (0xD11C) - Rear Differential Sump Oil Temperature (0x1E8A). Difference should be <25°C
- Refer to the relevant service information and check the rear differential oil quantity
- Refer to the relevant service information and check the rear differential oil specification
- Refer to the appropriate system wiring diagrams and check the rear differential oil temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the appropriate system wiring diagrams and check the rear differential actuator temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance