DTC P080A-54: Clutch Position Not Learned - Missing calibration: Action
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The rear differential control module performs a calibration routine every 500km. If any rear differential control module faults are present this routine will not run and P080A will set. Investigate other rear differential control module related DTCs first. P080A will also set if the rear differential control module connector has been removed and reconnected
- Investigate other rear differential control module related DTCs first. Using the manufacturer approved diagnostic system, perform routine - Control Module Calibration. Clear the DTCs and retest. If the fault persists, install a new rear differential control module