DTC B1009-62: Ignition Authorization - Signal compare failure: Action

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This DTC is only likely to occur following component replacement applications failing prior to completion.

Refer to the relevant system wiring diagrams and check the body control module power and ground circuits for open circuit, high resistance
Refer to the relevant system wiring diagrams and check the instrument cluster power and ground circuits for open circuit, high resistance
Using the manufacturer approved diagnostic system, perform a CAN network integrity test. Refer to the relevant system wiring diagrams and check the high speed CAN bus (powertrain) circuit for short circuit to ground, short circuit to power, open circuit, high resistance
Confirm correct body control module is installed
Confirm correct instrument cluster is installed
Re-synchronize ID by reconfiguring the instrument cluster as a new module