Pinpoint Test F: Time Lag Tests

F1: TIME LAG TEST 1
1. Ensure that no engine faults are present
2. Drive the vehicle until the engine and transmission are at normal operating temperature
3. Where possible, set all electrical consumers to off (headlamps, etc)
4. Set the air conditioning to off
5. Set the speed control to off
6. Stop the vehicle
7. Apply the parking brake and chock the wheels
8. Start the engine
9. Press the brake pedal and allow the engine to idle
10. Set the gearshift mechanism to 'Drive' and measure the time taken for the gear to engage
11. Repeat step 10 a further two times and calculate the average time taken for the gear to engage
  Is the average time 1.50 seconds or less?
  - Yes : GO to F2.
  - No : Contact Dealer Technical Support
F2: TIME LAG TEST 2
1. Set the gearshift mechanism to 'Neutral'
2. Press the brake pedal and allow the engine to idle
3. Set the gearshift mechanism to 'Reverse' and measure the time taken for the gear to engage
4. Repeat step 3 a further two times and calculate the average time taken for the gear to engage
  Is the average time 1.50 seconds or less?
  - Yes : Gears engaging within specified time
  - No : Contact Dealer Technical Support

WARNING: The automatic transmission fluid may be extremely hot.