Bluetooth® Pairing

Before a Bluetooth® phone mobile phone can be used on the vehicle hands free system, the phone must be 'paired' to the Bluetooth® phone system. The following steps describe the 'pairing' process:

NOTE: The process of pairing and connecting your phone with the vehicle using the mobile phone will vary depending on the type of mobile phone used.

Switch the ignition on and ensure that the audio system is active and that no other phone is currently connected to the vehicle's Bluetooth® system.
Using the mobile phone, search for Bluetooth® devices. On some phones, this is referred to as a new paired device. See the mobile phone's operating instructions for further information.
When the vehicle's Bluetooth® system is discovered (named Land Rover), select this device from the list.
When prompted, enter the Bluetooth® PIN (Personal Identification Number) into the mobile phone. This four digit number is randomly generated by the vehicle system and will be displayed on the screen.
Once the phone is paired and connected to the system, it can dock automatically. If it does not automatically dock, connect manually with the Bluetooth® system, via the mobile phone. Consult the mobile phone's instructions for further information.

NOTE: Some telephones require the Bluetooth® pairing to be set as 'authorized' or 'trusted' in order to automatically connect. Refer to the telephone operating instructions for further information.

Before a Bluetooth® phone mobile phone can be used on the vehicle hands free system, the phone must be 'paired' to the Bluetooth® phone system. The following steps describe the 'pairing' process.

There are two ways of pairing a mobile phone to the vehicle system: From vehicle to device or from device to vehicle.

NOTE: The process of pairing and connecting your phone with the vehicle using the mobile phone will vary depending on the type of mobile phone used. Selecting 'search new' only appears if pairing for the 1st time, subsequent attempts to use the 'search new' soft key needs to be accessed by pressing the Change Phone 1st soft key.

Switch the ignition system on and ensure that the touch screen is active.
From the home menu, select Phone .
A menu will appear. Select Search new .

NOTE:

The handset must set to 'discoverable' for the pairing to work.
The vehicle's Bluetooth® system is discoverable for only 3 minutes.

Device to Vehicle

Select Device to vehicle option. On some phones, this is referred to as new paired device. See your phone's operating instructions for further information.
When the vehicle's Bluetooth® system is discovered (named Land Rover), follow the on-screen instructions. Select Yes when prompted, to confirm the pairing. Either the phone or the vehicle system will ask for a PIN (Personal Identification Number). When prompted, enter a four digit PIN of your choice and select OK to confirm.
Enter the same PIN into the other device.
Once your phone is paired and connected to the system, a confirmation message will be displayed before switching to the Digit Dial screen.

Vehicle to Device

Select Vehicle to device option.
Identify your phone from the displayed list and select the corresponding Pair and Connect option.
A PIN (personal identification number) will be displayed in the TS, enter this PIN into your phone.
Once your phone is paired and connected to the system, a confirmation message will be displayed before switching to the Digit Dial screen.

NOTE: Some mobile phones require the Bluetooth® pairing to be set as 'authorized' or 'trusted' in order to automatically connect. Please refer to your phone's operating instructions for further information.