LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR4 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Four-Wheel Drive Systems >> Four-Wheel Drive Systems >> Removal And Installation >> Transfer Case Shift Motor >> Installation

Transfer Case Shift Motor: Installation

    CAUTION: Make sure that new bolts are installed.
  1. Install the shift motor.
    • Clean the components.
    • Tighten the Torx bolts to 25 Nm (18 lb.ft).
    • Connect the electrical connector.
  2. Install the transmission crossmember. Refer to Transmission Support Crossmember - 5.0L and Transmission Support Crossmember - 3.0L Diesel article. Refer to Transmission Support Crossmember - 4.0L/2.7L Diesel article.
  3. Calibrate a new transfer case shift motor using the diagnostic tool.
scientia non olet · About LEMON Manuals