Windshield Wiper Motor: Removal
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the plenum chamber panel. Refer to Plenum Chamber .
- Remove the windshield wiper motor and linkage.
- Remove the 2 bolts.
- Remove the 2 clips.
- Disconnect the electrical connector.
- Noting the fitted position, remove the wiper linkage.
- Remove the 2 bolts.
- Remove the nut.
NOTE:
Do not disassemble further if the component is removed for access only.