Windshield Washer Pump: Removal
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the LH fender splash shield. Refer to Fender Splash Shield .
- Release the windshield washer pump hoses.
- Drain the washer reservoir fluid.
- Disconnect the windshield washer pump electrical connector.
- Remove the windshield washer pump.
- Discard the O-ring seal.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.