LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission/Transaxle External Controls >> Automatic Transmission/Transaxle External Controls (Vehicles With: AWF21 6-Speed Automatic Transmission) >> Removal And Installation >> Selector Lever Cable >> Installation

Selector Lever Cable: Installation

    NOTE: This step requires the aid of another technician.
  1. Install the selector cable.
  2. Secure the cables in the clips.
  3. Install the heat shield.
  4. Secure the selector cables.
  5. Install the sealing plate.

    Torque: 7 Nm

  6. Install the gearshift lever.

    Torque: 10 Nm

  7. Connect the selector cable ball joints.
  8. Install the instrument pack bracket.

    Torque: 25 Nm

  9. Secure the drain tube and heater duct.
  10. Install the instrument panel, lower trim panels.
  11. Install the air cleaner assembly. Refer to AIR CLEANER .
  12. Install the floor console. Refer to FLOOR CONSOLE .
  13. Install the driveshaft. Refer to DRIVESHAFT - VEHICLES WITHOUT: DIESEL PARTICULATE FILTER (DPF) .
scientia non olet · About LEMON Manuals