Limp Home

If a transmission fault is detected by the TCM, the TCM adopts a limp home strategy and a message 'TRANSMISSION FAULT LIMITED GEARS AVAILABLE' is displayed in the message center. If the fault has an effect on engine emissions, the MIL in the instrument cluster will also be illuminated.

In limp home mode, P, R and N functions operate normally (if the fault allows these selections) and the TCM locks the transmission in 3rd gear to allow the driver to take the vehicle to a Land Rover dealer or approved repairer. Torque converter lock-up is disabled and reverse-lock-out will not function.

If the vehicle is stopped and subsequently restarted in the limp home mode condition, the TCM operates normally until the fault which caused the condition is detected again.