LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Reminder Light (Reset Procedures) >> Maintenance Service Reminder >> Maintenance Service Reminder Reset - Procedure 02

Maintenance Service Reminder Reset - Procedure 02

  1. Ensure that ignition switch is turned to OFF position.
  2. Press and hold left instrument cluster reset button.
    NOTE: Reset button is located near lower left side of speedometer.
  3. With button held, turn ignition switch on to I (AUX) position.
  4. Continue holding instrument cluster reset button for 5 seconds, until SIA RESET message appears.
  5. The message center will display the distance-to-service status as RESET SIA: 3600km/mls and the type of service (INSPECTION).
  6. When distance reset limit has been reached or exceeded, press and hold left button for another 5 seconds. RESET flashes in the message center.
  7. If left button is not pressed again before fifth flash of RESET, the reset will not be performed. The message center will display the existing distance to service data for 5 seconds, followed by END SIA for 2 seconds, and then switch off.
  8. If left button is pressed before the fifth flash of RESET, the service distance will be reset. The message center will display the new service distance END SIA: 25000 km/miles for 5 seconds, followed by END SIA for 2 seconds, and then switch off.
  9. Turn ignition switch to OFF position.