DTC U201F-31: External Receiver - No signal: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the RF receiver power and ground circuits for open circuit, high resistance
- Refer to the appropriate system wiring diagrams and check the LIN bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, check and install a new RF receiver
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new keyless vehicle module as required