Possible Causes
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC will normally be logged when a new module has been installed
- Leveling sensor calibration routine not carried out
NOTE:
Sensor calibration routine must be carried out with the vehicle unladen
- Calibrate the headlamp leveling sensors using the manufacturer approved diagnostic system, carry the out routine 'Headlamp Control Module System Calibration'