DTC C1B00-85: Steering Angle Sensor - Signal above allowable range: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Clear DTC and retest
- Check if the steering angle sensor module has been removed and refitted incorrectly (the module should be fitted in the straight ahead position)
- If module has been refitted, check clock spring for damage and correct alignment
- If fault persists, check and install a new steering angle sensor module as required