DTC U2100-54: Initial Configuration Not Complete - Missing Calibration: Action

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Ensure electric park brake is released.

Carry out - Assembly Test - If all conditions are met, suspect electric park brake control module fault
Switch ignition off and on. Apply and release the electric park brake using the electric park brake switch. Clear the DTC and re-test. If the fault is not reset, suspect electric park brake control module fault. Install a new electric park brake control module as necessary