DTC C2008-13: Left Motor - Circuit Open: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagram and check the left electric park brake actuator motor supply fuse. Rectify as necessary
- Refer to the appropriate system wiring diagram and check the electric park brake control module pin 30 ground circuit for open circuit, high resistance
- Switch ignition off and on. Apply and release the electric park brake using the electric park brake switch. Clear the DTC and re-test. If the fault is not reset, suspect electric park brake actuator fault. Install a new electric park brake actuator as necessary
- Switch ignition off and on. Apply and release the electric park brake using the electric park brake switch. Clear the DTC and re-test. If the fault is not reset, suspect electric park brake control module fault. Install a new electric park brake control module as necessary