DTC C2007-18: Right Motor - Circuit Current Below Threshold: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagram and check the right electric park brake actuator motor supply fuse. Rectify as necessary
- Refer to the appropriate system wiring diagram and check the electric park brake control module ground circuit for open circuit, high resistance
- Test the battery voltage and charging system. Repair charging system as necessary, clear DTC and re-test
- Refer to the appropriate system wiring diagram and check the right electric park brake actuator circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Switch ignition off and on. Apply and release the electric park brake using the electric park brake switch. Clear the DTC and re-test. If the fault is not reset, suspect electric park brake actuator fault. Install a new electric park brake actuator as necessary
- Switch ignition off and on. Apply and release the electric park brake using the electric park brake switch. Clear the DTC and re-test. If the fault is not reset, suspect electric park brake control module fault. Install a new electric park brake control module as necessary