DTC C2005-09: Right Actuator - Component Failures: Action

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.

Check that the right electric park brake actuator is correctly installed to the vehicle. Rectify as necessary
Switch ignition off and on. Apply and release the electric park brake using the electric park brake switch. Clear the DTC and re-test. If the fault is not reset, suspect electric park brake actuator fault. Install a new electric park brake actuator as necessary