DTC B1C30-73: Disable Switch - Actuator stuck closed: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the park assist switch and switch circuit. Repair or replace any wiring harness as required
- Using the manufacturers approved diagnostic system clear the DTC and run the on demand self-test. If the problem persists, suspect the control switch
- Check the switch function