DTC B1B58-11: Rear Sensors Power Circuit - Circuit short to ground: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Check rear and front (if front parking aid system fitted) bumper harness for signs of damage and security of connections
- Refer to the appropriate system wiring diagrams and check the park assist rear sensor power circuit and front sensor power circuit (if front parking aid system fitted) for short circuit to ground. Repair or replace any wiring harness as required
- Using the manufacturers approved diagnostic system clear the DTC and run the on demand self-test. If the problem persists, suspect the control module
- Cycle the ignition off, then on, to power up parking aid system and check corrective action