DTC U0428-62: Invalid Data Received From Steering Angle Sensor Module - Signal compare failure: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Check for correct installation of the steering angle sensor. Install a new steering angle sensor module as required
- Carry out the yaw rate sensor calibration routine using the manufacturer approved diagnostic system
- Check the steering and suspension for damage/wear which could affect the track, rectify as necessary