DTC U0125-88: Lost Communication With Multi-Axis Acceleration Sensor Module - Bus off: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the power and ground connections to the module. Using the manufacturer approved diagnostic system, complete a CAN network integrity test. Repair circuit(s) as required. Clear DTC and retest
- If fault persists, check and install a new lateral acceleration sensor as required