DTC C1B22-24: Hill Descent Switch - Signal stuck high: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Check hill descent control switch has not been pressed for a period greater than 60 seconds
- Refer to the appropriate system wiring diagrams and check the power and ground connections to the center console switchpack, check the switch and circuit for short circuit to power. Repair circuit as required. Clear DTC and retest
- Check the hill descent control switch operation. Check and install a new hill descent control switch as required