DTC C006A-01: Multi-Axis Acceleration Sensor - General electrical failure: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out the lateral acceleration sensor calibration routine using the manufacturer approved diagnostic system. Clear DTC and retest
- Refer to the appropriate system wiring diagrams and check lateral acceleration sensor circuit for short circuit to power, open circuit, high resistance. Repair circuit as required. Clear DTC and retest
- If fault persists, check and install new lateral acceleration rate sensor as required