DTC C0063-01: Yaw Rate Sensor - General electrical failure: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out the yaw rate sensor calibration routine using the manufacturer approved diagnostic system. Clear DTC and retest
- Refer to the appropriate system wiring diagrams and check yaw rate sensor circuit for open circuit. Repair circuit as required. Clear DTC and retest
- If fault persists, check and install new yaw rate sensor as required