DTC C0062-28: Longitudinal Acceleration Sensor - Signal bias level out of range/zero adjustment failure: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out the longitudinal acceleration sensor calibration routine using the manufacturer approved diagnostic system
- Refer to the appropriate system wiring diagrams and check longitudinal acceleration sensor circuit for short circuit to power, open circuit, high resistance. Repair circuit as required. Clear DTC and retest
- Refer to the appropriate system wiring diagrams and check longitudinal acceleration sensor power supply circuit for open circuit. Repair circuit as required. Clear DTC and retest
- If fault persists, check and install a new longitudinal acceleration sensor as required