DTC C0061-64: Lateral Acceleration Sensor - Signal plausibility failure: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out the lateral acceleration sensor calibration routine using the manufacturer approved diagnostic system
- Refer to the appropriate system wiring diagrams and check lateral acceleration sensor circuit for open circuit, high resistance. Repair circuit as required. Clear DTC and retest
- If fault persists, check and install a new lateral acceleration sensor as required