DTC C0044-54: Brake Pressure Sensor "A" - Missing calibration: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out the brake pressure sensor calibration routine using the manufacturer approved diagnostic system
- Refer to the appropriate system wiring diagrams and check ABS control module power circuit for open circuit. Repair circuit as required. Clear DTC and retest
- If fault persists, check and install new ABS control module as required