General Procedures: Activation
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Failure to follow this instruction may result in damage to the component.
- Set the ignition to the on position, make sure the air conditioning (A/C) is in the off position.
- Start the engine and allow to run for a minimum of 5 minutes.
- Set the heater controls to 22°C, with the fan speed set to 75%.
- Switch on the A/C system.
- Open all air vents in the dashboard.
- Run the A/C system for a minimum of 5 minutes, while the engine is still at idle speed.
- Once this is achieved the compressor is stabilized, with the oil being distributed evenly throughout the system.