DTC P1889-7A: Oil Pressure Pump Performance - Fluid Leak Or Seal Failure: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Using the manufacturer approved diagnostic system check and install latest relevant level of software to the rear differential control module
- Clear the DTC and retest
- If the DTC returns, replace the oil filter
- Carry out oil level check procedure. For additional information, refer to: Active On-Demand Coupling Filling