DTC U2300-55: Central Configuration - Not configured: Action

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.

Using the manufacturer approved diagnostic system, re-configure the body control module with the latest level software
Using the manufacturer approved diagnostic system, check and up-date the car configuration file as necessary. Clear the DTCs and retest
Using the manufacturer approved diagnostic system, perform a CAN network integrity test. Refer to the relevant system wiring diagrams and check the medium speed CAN bus (body) circuit for short circuit to ground, short circuit to power, open circuit, high resistance