LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Side Air Curtain Module >> Installation

Side Air Curtain Module: Installation

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side air curtain module.
    • Tighten the Torx screws to 10 Nm (7 lb.ft).
    • Tighten the screws.
    • Connect the electrical connector.
  2. Secure the tire deflation wiring harness into the clips.
  3. Secure the roof opening panel drain tube into the clips.
  4. Install the headliner. Refer to Headliner article.
scientia non olet · About LEMON Manuals