LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> C-Pillar Side Impact Sensor >> Installation

C-Pillar Side Impact Sensor: Installation

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side impact sensor.
    • Tighten the Torx bolts to 8 Nm (6 lb.ft).
    • Connect the electrical connector.
  2. Install the C-pillar lower trim panel. Refer to C-Pillar Lower Trim Panel article.
scientia non olet · About LEMON Manuals