DTC C1A06-64: Right Rear Height Sensor - Signal plausibility failure: Action

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If any height sensor fixings were slackened or found to be loose or if a height sensor was changed, the vehicle ride height MUST be re-calibrated

Check that the vehicle is free of obstructions. Check the height sensor for correct installation and torque of fixings. If any fixings require attention, re-calibrate the ride height using the approved diagnostic system. Clear the DTCs and retest
Visually inspect the height sensor for security, damage and correct orientation/installation. Check the sensor connector for damage. Repair/renew as required, clear the DTCs and retest